![]() ![]() |
Support Grids
Wedge wire type support grids provide superior media retention characteristics in vessels of all types. AMACS support grids are fabricated with many different wire sizes and slot openings to achieve the most demanding load and design conditions. They feature durable construction, precise open area and are virtually non-clogging. Support grids have flat surface and are available in single piece construction or in sections to allow installation through a manway. Support grids are typically used in sand filters, carbon filters, molecular sieves, desulfurizer and other fixed bed catalyst reactors.
Download: AMACS Catalyst Bed Supports
Resin Traps or Strainers |
AMACS wedge wire type resin traps (also called strainers) are typically housed in-line with the process flow to capture solids thereby preventing expensive media from traveling downstream. These traps can be designed to capture media particles as small as 50 micron. With a continuous open slot, they provide sufficient open area to let process flow move smoothly, while minimizing pressure loss through the screen. AMAC’s engineering group can design a complete system including the housing.
|
Nozzles |
![]() |
Inlet and Outlet Baskets |
AMACS wedge wire style inlet and outlet baskets are designed to meet the open area requirements, handle the design temperature and meet differential pressure specifications without restricting flow. Combination inlet basket (distributor laterals) and outlet basket (collector laterals) systems can be designed and manufactured to meet a customer’s performance requirements or specifications. Backwash systems with reverse flow can also be designed to automatically clean the screen products.
|
Scallops |
AMACS wedge wire scallops are built to accommodate the requirements of a radial flow reactor vessel. They offer exceptional strength and resistance to collapse and breaking. With the high open areas available, and vertical slots orientation a customer’s efficiency, pressure drop reduction and non-clogging requirements are achieved.
|
Hub and Header Laterals |
Hub laterals are designed for vessels with elliptical heads. They enable the system to collect completely to the bottom of the vessel. Header laterals are suited for flat bottom vessel distributor or collector applications. These systems can be designed to accommodate side, center, top or bottom inlet piping. Integral backwash systems can be designed for any hub or header lateral for a fast, effective and efficient cleaning of the screen. Laterals are usually connected to the hub or header with either flanges or threaded fittings. Systems are designed for effective liquid or solid retention in a wide range of applications including exchangers, clay or sand filtration, carbon towers and power plants with water systems. Our experienced engineering group designs each system to provide even distribution or collection across the entire cross-sectional area of the vessel.
|
Curved and Flat Screens |
Wedge wire screens are particularly well matched to the requirements of high capacity filtration. These screens are self-cleaning, durable and reusable. Sieve bend (or curve screens) have the wedge wires oriented perpendicular to the flow direction. This allows water to pass through screen to be collected as wastewater, while the angle and flow allows the solids (or branches) to slide over the screen’s smooth surface. These screens are effective in wastewater treatments, dewatering systems and other water-solid separation applications as well. Flat screen panels are used in a similar application as sieve bend screens as well as in shakers for sewage separation systems.
|